3,405 research outputs found

    Arthroscopic treatment of a medial meniscal cyst using a posterior trans-septal approach: a case report

    Get PDF
    Arthroscopic partial menisectomy followed by cyst decompression is currently recommended for treatment of a meniscal cyst. However, it is doubtful whether partial menisectomy should be performed on cysts communicating with the joint in cases without a meniscal tear on its surface since meniscal function will be sacrificed. In this report, a meniscal cyst arising from the posterior horn of the medial meniscus without meniscal tear on its surface was resected using an arthroscopic posterior trans-septal approach. A 59 year-old male presented to our hospital with popliteal pain when standing up after squatting down. Magnetic resonance imaging revealed a multilobulated meniscal cyst arising from the posterior horn of the medial meniscus extending to the posterior septum with a grade 2 meniscal tear by Mink's classification. The medial meniscus was intact on the surface on arthroscopic examination. The meniscal cyst and posterior septum were successfully resected using a posterior trans-septal approach without harming the meniscus. This is the first report on a meniscal cyst being resected using an arthroscopic posterior trans-septal approach with a 9-month follow-up period

    High capacity cathode materials for Li-S batteries

    Full text link
    To enhance the stability of sulfur cathode for a high energy lithium-sulfur battery, sulfur-activated carbon (S-AC) composite was prepared by encapsulating sulfur into micropores of activated carbon using a solution-based processing technique. In the analysis using the prepared specimen of S-AC composite by the focused ion beam (FIB) technique, the elemental sulfur exists in a highly dispersed state inside the micropores of activated carbon, which has a large surface area and a narrow pore distribution. The S-AC composite was characterized through X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) method, selected area electron diffraction (SAED), energy dispersive X-ray spectrometry (EDX), Fourier transform infrared spectroscopy (FT-IR), thermogravimetry analysis (TGA), and field emission scanning electron microscopy (FESEM). A lithium-sulfur cell using the S-AC composite has a high first discharge capacity over 800 mA h g -1 S even at a high current density such as 2C (3200 mA g -1 S) and has good cycleability around 500 mA h g-1 S discharge capacity at the 50th cycle at the same current density. © 2013 The Royal Society of Chemistry

    Cug2 is essential for normal mitotic control and CNS development in zebrafish.

    Get PDF
    Background: We recently identified a novel oncogene, Cancer-upregulated gene 2 (CUG2), which is essential for kinetochore formation and promotes tumorigenesis in mammalian cells. However, the in vivo function of CUG2 has not been studied in animal models. Results: To study the function of CUG2 in vivo, we isolated a zebrafish homologue that is expressed specifically in the proliferating cells of the central nervous system (CNS). Morpholino-mediated knockdown of cug2 resulted in apoptosis throughout the CNS and the development of neurodegenerative phenotypes. In addition, cug2-deficient embryos contained mitotically arrested cells displaying abnormal spindle formation and chromosome misalignment in the neural plate. Conclusions: Therefore, our findings suggest that Cug2 is required for normal mitosis during early neurogenesis and has functions in neuronal cell maintenance, thus demonstrating that the cug2 deficient embryos may provide a model system for human neurodegenerative disorders

    Multi-point monitoring of nitrous oxide emissions and aeration efficiency in a full-scale conventional activated sludge tank

    Get PDF
    In this work the biological tank of a WRRF in Italy was monitored placing five floating hoods on a plug-flow-like biological aerated tank surface in order to capture emission dynamics in both time and space domains. The five hoods report which location is more responsible for N2O production at a certain moment of the day. Moreover, with this experimental investigation, a spatial shift in N2O production towards the end of the biological tank could be detected. This provides important insights in the changes in biological dynamics especially with varying incoming load

    Gas hydrate inhibition by perturbation of liquid water structure

    Get PDF
    Natural gas hydrates are icy crystalline materials that contain hydrocarbons, which are the primary energy source for this civilization. The abundance of naturally occurring gas hydrates leads to a growing interest in exploitation. Despite their potential as energy resources and in industrial applications, there is insufficient understanding of hydrate kinetics, which hinders the utilization of these invaluable resources. Perturbation of liquid water structure by solutes has been proposed to be a key process in hydrate inhibition, but this hypothesis remains unproven. Here, we report the direct observation of the perturbation of the liquid water structure induced by amino acids using polarized Raman spectroscopy, and its influence on gas hydrate nucleation and growth kinetics. Amino acids with hydrophilic and/or electrically charged side chains disrupted the water structure and thus provided effective hydrate inhibition. The strong correlation between the extent of perturbation by amino acids and their inhibition performance constitutes convincing evidence for the perturbation inhibition mechanism. The present findings bring the practical applications of gas hydrates significantly closer, and provide a new perspective on the freezing and melting phenomena of naturally occurring gas hydrates.112716Ysciescopu

    Evaluation of 3D printed PCL/PLGA/beta-TCP versus collagen membranes for guided bone regeneration in a beagle implant model

    Get PDF
    Here, we compared 3D-printed polycaprolactone/poly(lactic-co-glycolic acid)/beta-tricalcium phosphate (PCL/PLGA/beta-TCP) membranes with the widely used collagen membranes for guided bone regeneration (GBR) in beagle implant models. For mechanical property comparison in dry and wet conditions and cytocompatibility determination, we analyzed the rate and pattern of cell proliferation of seeded fibroblasts and preosteoblasts using the cell counting kit-8 assay and scanning electron microscopy. Osteogenic differentiation was verified using alizarin red S staining. At 8 weeks following implantation in vivo using beagle dogs, computed tomography and histological analyses were performed after sacrifice. Cell proliferation rates in vitro indicated that early cell attachment was higher in collagen than in PCL/PLGA/beta-TCP membranes; however, the difference subsided by day 7. Similar outcomes were found for osteogenic differentiation, with approximately 2.5 times greater staining in collagen than PCL/PLGA/beta-TCP, but without significant difference by day 14. In vivo, bone regeneration in the defect area, represented by new bone formation and bone-to-implant contact, paralleled those associated with collagen membranes. However, tensile testing revealed that whereas the PCL/PLGA/beta-TCP membrane mechanical properties were conserved in both wet and dry states, the tensile property of collagen was reduced by 99% under wet conditions. Our results demonstrate in vitro and in vivo that PCL/PLGA/beta-TCP membranes have similar levels of biocompatibility and bone regeneration as collagen membranes. In particular, considering that GBR is always applied to a wet environment (e.g. blood, saliva), we demonstrated that PCL/PLGA/beta-TCP membranes maintained their form more reliably than collagen membranes in a wet setting, confirming their appropriateness as a GBR membrane.11109Ysciescopu

    Expression Screening of Fusion Partners from an E. coli Genome for Soluble Expression of Recombinant Proteins in a Cell-Free Protein Synthesis System

    Get PDF
    While access to soluble recombinant proteins is essential for a number of proteome studies, preparation of purified functional proteins is often limited by the protein solubility. In this study, potent solubility-enhancing fusion partners were screened from the repertoire of endogenous E. coli proteins. Based on the presumed correlation between the intracellular abundance and folding efficiency of proteins, PCR-amplified ORFs of a series of highly abundant E. coli proteins were fused with aggregation-prone heterologous proteins and then directly expressed for quantitative estimation of the expression efficiency of soluble translation products. Through two-step screening procedures involving the expression of 552 fusion constructs targeted against a series of cytokine proteins, we were able to discover a number of endogenous E. coli proteins that dramatically enhanced the soluble expression of the target proteins. This strategy of cell-free expression screening can be extended to quantitative, global analysis of genomic resources for various purposes.National Research Foundation of KoreaKorea (South). Ministry of Education, Science and Technology (MEST) (grant 2011K000841)Korea (South). Ministry of Education, Science and Technology (MEST) (grant 2011-0027901

    Thermoelectric materials by using two-dimensional materials with negative correlation between electrical and thermal conductivity

    Get PDF
    In general, in thermoelectric materials the electrical conductivity sigma and thermal conductivity kappa are related and thus cannot be controlled independently. Previously, to maximize the thermoelectric figure of merit in state-of-the-art materials, differences in relative scaling between sigma and kappa as dimensions are reduced to approach the nanoscale were utilized. Here we present an approach to thermoelectric materials using tin disulfide, SnS2, nanosheets that demonstrated a negative correlation between sigma and kappa. In other words, as the thickness of SnS2 decreased, sigma increased whereas kappa decreased. This approach leads to a thermoelectric figure of merit increase to 0.13 at 300 K, a factor similar to 1,000 times greater than previously reported bulk single-crystal SnS2. The Seebeck coefficient obtained for our two-dimensional SnS2 nanosheets was 34.7mVK(-1) for 16-nm-thick samples at 300 K.114330Ysciescopu
    corecore